Accessories

Specifically designed to conceal the floor mounting plates of our 3" diameter bolt down legs, the textured black cover plates will give a sharp, crisp, decorative appeal to an otherwise industrial application. With a 8" overall diameter, the cover plate...

Designed for use with our 2-3/8' and 3" diameter legs, this 8" square stamped steel mounting plate comes with a M10 x 1-9/16"(40mm) long hex head bolt and a 1-1/2" diameter washer to allow for a strong threaded connected to the top the columns. Great for...

Designed for use with our 2-3/8' and 3" diameter legs, this 11-1/8" square stamped steel mounting plate comes with a M10 x 1-9/16"(40mm) long hex head bolt and a 1-1/2" diameter washer to allow for a strong threaded connected to the top the columns...

Can surface mount or flush mountAvailable in 42" or 54" lengths1" x 3/4" 10 gauge steel channel15 holes for screws (screws are included)Powder coat black finish

Perforated steelFinish: Black (standard)Other finishes: Require 2-1/2 week lead time for 19 powder coat finishesPerforation pattern: 3/16" dia. holes spaced 1-3/4" apartCable cutout: 1-1/4" x 3"Panel height: 10"Panel lenght: 30", 42", 48", 54", 60", 66",...

Our large twin wheel caster is ideal for use on audio/visual equipment cabinets. The F6058 caster is offered in black nylon with a M10 threaded stem for attachment. Each caster is suitable for soft as well as hard flooring surfaces. Overall caster...

Dress up your metal table legs with our decorative covers. The sleeves are made of beautiful finished steel and fit standard 2-3/8" (60mm) diameter table legs. The covers not only disguise the leveler foot, they add a stylish profile to your 2-3/8"...

The F3719 is a 2-part adjustable foot that offers customization and flexibility. Designed for use with kitchen cabinets, garages and closet applications. Please note: Shown with optional panel clip for attaching (not included). Heights: 4", 4-3/4", 6"...

Designed specifically for use with the stainless steel table bases, this large glass top adapter allows for seamless and screwless connection to the underside of glass table tops. The adapter is glued to the underside of your glass table top which adds...

Designed for use with our 2-3/8' and 3" diameter legs, this 10" square stamped steel mounting plate comes with a M10 x 1-9/16"(40mm) long hex head bolt and a 1-1/2" diameter washer to allow for a strong threaded connected to the top the columns. Great...

Use these polished aluminum adapters for affixing your table legs to a glass table top. This adapter threads onto an M10 stud.  The stud then threads into the top of one our glass top table legs for a sleek and affordable upgrade for your...

Use these stainless steel adapters to fasten table legs to a glass table top. This adapter threads onto an M10 stud.  The stud then threads into the top of one our glass top table legs for a sleek and affordable upgrade for your home...

Attach your table legs to a glass table top with these polished aluminum adapters . This adapter threads onto an M10 stud. Then the stud then threads into the top of one our glass top table legs for a sleek and affordable upgrade for your home or office...

The F3742 is a zinc base leveler that can be used to give cabinets, garage cabinets, and closet applications additional height. This item adjusts with a flat bladed screwdriver.  Mounted by knocking in the the tabbed prongs on the bottom of the...

The F3767 is a zinc base leveler that can be used to give furniture legs more height. This item adjusts with 6 mm hex key, flat-bladed screwdriver, or Phillips screwdriver. Height: 1-5/8" Adjustment: 1" Finish: Zinc Thread diameter: 1-1/4" Base...

The F3749 is a heavy-duty zinc base leveler that can be used to level cabinets, a run of toe kicks, garage cabinets, and general closet applications. The two prongs get knocked in to the side panels to give a solid support and allow for height adjustment...

Use these stainless steel adaptors for affixing your table legs to a glass table top. Threads onto M-10 stud on the top of the leg for a sleek, clean look in your home or office.Height: 1/2" (13mm)Diameter: 2-1/2" (65mm)Thickness (exposed): .31"...

Our F4242 is a set of click catch table connectors for joining free-standing tables or table leaves. This set includes both a male and female part; the male portion rotates 360 degrees with stops at every 90 degree. Male piece diameter: 2-1/4" Male...

The Upper Support Post can be used for attaching upper cabinets or transaction shelving to any desk system. We offer a permanent mounting style that attaches by two screws running through the desk top. The components have a sharp clean-line appearance,...

Offers a great compliment to our other console legs. Can also be used for glass applications like a floating bar or side-shelf by using our bar console glass adapters. Comes with bolts for attaching leg to counter or table (thru-bolted through counter...