Decorative

Hinge Pin Door Stop w/ Self-Adjusting Pad.Finish: Satin Nickel.Rubber Bumper Adjustable to Stop Door at Any Angle.

100 lbs. 24" Full Extension Ball Bearing Drawer Slide.*0.9*1.2 mmLubricated steel ball bearings with cage hold forward - retains cage during drawer member installationNon-handed trigger disconnect releaseSynthetic rubber hold-in detent prevents...

3/4" X 5 mm Diamond Hole / Finish: Bright Nickel P/n#345np.5 mm pin diameter.Solid steel construction3/4" long armAvailable in cartons of 1000 pcs

86mm height 500 mm White Double Wall Metal Drawer Box System with 10 mm Dowels.Front cams provide vertical and horizontal drawer front adjustmentRelease cam for easy drawer front removalRecommended 5/8" material for drawer bottom and back

2mm Clip-on Euro Base Plate for 700 Series Soft-close Hinges.Without Euro Screws.

Heavy Duty 8 lb. Magnetic Catch with Strike Plate and Screws.

Heavy Duty 0 mm Non-Cam Adjustable Zinc Die Cast Plate without Screws for Cabinet Refacing for 500 Series European Hinges

3/4" Angled Shelf Support with 1/8" Hole. Sold per thousand. Finish:Bright Nickel.1/4" pin diameter.Solid steel construction3/4" long armAvailable in cartons of 1000 pcs

5" Overall Length Cabinet Pull. Holes are 3" center-to-center. Packaged with two 8-32 x 1" and two Break-away screws. Finish: Brushed Pewter

3 Piece Spring Grommet for 60 mm Diameter HoleFinish:White

Extra Heavy Duty Standard 24" Finish Zinc1800 lb per pairSingle slot designSteel with zinc plating

Heavy Duty Bracket 22" Finish White210 lb per shelf (16"-24")Double-lug brackets provide strong weight-bearing supportSteel with zinc plating

4-1/16" x 1-1/8" Sash Pull.Holes are 3-1/2" center-to-center.Finish: Satin Nickel6X3401-B screws sold separatelySKU: KNB - HR-SP01-SNMPN:SP01-SNItem Type: Functional HardwareItem Finish: Satin NickelMaterial: ZincItem Width: 1.13" (29mm)

Single-Track Shelf Standard 60" WhiteSingle track standards fit in 5/8" wide grooveStandards quickly install using nails or screws (not included)Available in a variety of sizes which can also be cut to length

Button Catch Finish:Zinc Receiver

4-3/4" Overall Length Cabinet Pull. Holes are 96 mm center-to-center. Packaged with two 8-32 x 1" and two Break-away screws. Finish: Satin Nickel

Universal Angle Bracket 3/4" x 3/4" x 2" Slotted Holes 32 mm On Center Finish: Bright Nickel

22" Full Extension Ball Bearing Drawer Slide. BIFMA 100# / PRLubricated steel ball bearings with cage hold forward - retains cage during drawer member installationNon-handed trigger disconnect releaseSynthetic rubber hold-in detent prevents bounce-back...

1-5/8" Diameter Zinc Die Cast Cabinet Knob.Packaged with one 8-32 x 1" and 1-3/4" break-away screws.Finish: Brushed Pewter

125 Degree 0 mm Crank Cam Adjustable Standard Duty Hinge with Easy-Fix Dowels